Ford Bronco
Raptor
Ford Bronco
2026 ModelLeft Hand Drive · SUV
Last updated
Specifications and equipment
Key Specifications
The price shown is the export price ex works USA: shipping and import duty for your country are calculated separately below.
| Model year | 2026 |
|---|---|
| Make | Ford |
| Model | Bronco |
| Trim | Raptor |
| Condition | New |
| Mileage | 40 km |
| Exterior color | Shadow Black |
| Origin | USA |
|---|---|
| Steering | LHD |
| Fuel | Petrol |
| Engine | 3,000 cc |
| Body type | SUV |
| Stock number | INV007323 |
| Export price | $84,600 (ex works, USA) |
Powertrain
- Engine: 3.0L EcoBoost V6, twin-turbocharged, gasoline direct injection, DOHC, variable valve control.
- Displacement: 3,000 cc per supplied VIN decode.
- Output: 418 hp at 5,750 rpm and 440 lb-ft (597 Nm) at 2,750 rpm, on premium fuel.
- Transmission: 10-speed automatic.
- Drivetrain: 4WD/4x4.
- Fuel: Petrol.
- The listing identifies the transmission as automatic; the 10-speed specification is from Ford’s model information.
Performance and Off-Road Capability
- Raptor-specific high-performance off-road configuration with 37-inch all-terrain tires and beadlock-capable wheels.
- Ground clearance: approximately 13.1 in (333 mm).
- Water-fording capability: up to approximately 37 in (940 mm), as stated in Ford model information.
- Maximum towing capacity: up to 4,500 lb (2,041 kg), subject to configuration and equipment.
- Ford’s published Raptor figures are approximately 191 in (4,851 mm) long, 116.5 in (2,959 mm) wheelbase, 86.9 in (2,207 mm) wide, and 77.8 in (1,976 mm) high. Width varies by measurement convention; the shipping width above uses an estimated folded-mirror/body width.
Chassis, Suspension, and Brakes
- Raptor-tuned high-performance suspension with long-travel capability and FOX™ dampers.
- Front and rear locking differentials and advanced 4x4 systems are part of the Raptor’s off-road configuration; exact equipment can vary by market and build.
- Four-wheel disc brakes with anti-lock braking system.
- Powder-coated steel bumpers and full-vehicle steel bash plates are identified in Ford’s Raptor feature information.
- Curb weight is estimated at approximately 5,814 lb (2,637 kg); published figures vary with equipment. Shipping data uses an approximate curb weight of 2,633 kg.
Dimensions and Capacity
- Body style: four-door SUV/MPV.
- Length: approximately 4,851 mm.
- Wheelbase: approximately 2,959 mm.
- Height: approximately 1,976 mm.
- Width: approximately 2,179 mm with mirrors folded, estimated from body-width specifications.
- Seating capacity: 5.
- Engine displacement is reported as 3,000 cc in the supplied VIN decode; Ford technical references may state nominal 3.0L displacement while detailed engine references can differ slightly.
Safety
- Ford Co-Pilot360 driver-assistance technologies.
- Pre-Collision Assist with Automatic Emergency Braking and pedestrian detection.
- Blind Spot Information System (BLIS) with Cross-Traffic Alert.
- Lane-Keeping System.
- 360-degree camera system and front/rear sensing systems.
- AdvanceTrac with Roll Stability Control, electronic traction control, tire-pressure monitoring, and post-collision braking.
- Airbag and restraint equipment includes front airbags, seat-side airbags, and Safety Canopy side-curtain airbags.
- No specific independent crash-test rating for this exact 2026 Raptor configuration is confirmed here.
Equipment & Options
Convenience
- Adaptive Cruise Control
- Heated Seats
- Heated Steering Wheel
- Keyless Entry
- Keyless Start
- Navigation System
- Remote Start
Entertainment
- Android Auto®
- Apple CarPlay®
- Bluetooth®
- USB Port
- WiFi Hotspot
Exterior
- Alloy Wheels
- Sunroof/Moonroof
- Tow Hitch
- Tow Hooks
Safety
- Automatic Emergency Braking
- Backup Camera
- Blind Spot Monitor
- Brake Assist
- LED Headlights
- Lane Departure Warning
- Rear Cross Traffic Alert
- Stability Control

No Support
Handle importation process independently
Disclaimer: Our customs duty calculations are thoroughly researched and regularly updated, however, actual import costs may vary based on final vehicle specifications, prevailing foreign exchange rates, and customs evaluation at the port of entry. All customs clearance and duty assessments are conducted at the sole discretion of local customs authorities in the destination country. IPAS maintains full cooperation with all customs agencies and strictly adheres to local import laws and regulatory requirements.
Enquiry
Frequently Asked Questions
Everything you need to know about importing the Ford Bronco 2026





